Material
Location

How to Conduct a Commercial Waste Audit: Checklist, Sampling and Action Plan


A commercial waste audit shows what a business is actually throwing away, what is contaminating its recycling and where disposal costs may be reduced. This guide explains how to set the audit scope, choose a sampling approach, sort and weigh material, calculate results and turn the findings into a practical action plan.
How to Conduct a Commercial Waste Audit: Checklist, Sampling and Action Plan

Published November 16, 2026

MONTREAL (RecyclingMonster): The most important decision in electric-vehicle battery recycling can happen before the battery ever reaches a shredder.

When a battery pack leaves a vehicle, it may still contain valuable materials — and potentially years of useful energy-storage capability.

That creates several possible routes.

A healthy pack may be repaired or reused. A pack no longer suited to automotive duty may be repurposed for a less demanding stationary application. A damaged, unsafe or economically unsuitable pack may move directly into recycling.

The challenge is determining which path makes sense.

That decision is becoming more important as the first large generation of electric vehicles moves closer to retirement and battery recyclers expand processing capacity ahead of the expected wave of end-of-life packs.

Short answer: EV battery recycling starts with identification and evaluation, not necessarily shredding. Batteries can be diagnosed for repair, reuse or second-life applications before recycling. Packs selected for recycling are made safe, dismantled or shredded, and separated into materials including copper, aluminum, steel and a concentrated electrode material known as black mass. Hydrometallurgical, pyrometallurgical or emerging direct-recycling processes can then recover lithium, nickel, cobalt and other battery materials for further refining and manufacturing.
Key Points
  • An EV battery leaving automotive service does not automatically need to be shredded; diagnostics can determine whether a pack or module is suitable for repair, reuse or repurposing.
  • State-of-health testing can examine remaining capacity, resistance, pack balance, operating history and other safety and performance indicators.
  • Battery recycling commonly produces black mass containing cathode and anode material, while copper, aluminum, steel and plastics can enter separate recovery streams.
  • Hydrometallurgy and pyrometallurgy are the two main commercial material-recovery routes; direct recycling is being developed to preserve more of the engineered cathode material.
  • Battery chemistry increasingly affects recycling economics as lower-value LFP batteries account for a growing share of the global EV market.

What Happens When an EV Battery Leaves the Vehicle?

An EV traction battery is not the same as a household rechargeable battery.

It is a high-voltage energy-storage system made from cells assembled into modules or directly into a larger pack, together with cooling systems, electrical connections, sensors, controls and a battery-management system.

When the vehicle reaches the end of its life, or the battery requires replacement, the pack may reach a dealer, repair operation, automotive dismantler or another qualified facility.

From there, its condition has to be assessed.

The decision tree is not simply “use or recycle.”

1. Can the battery remain in vehicle service?

2. Can it be repaired or remanufactured?

3. Can it be reused in another vehicle?

4. Can it be repurposed for stationary storage?

5. Or should it move directly to material recovery?

EPA specifically recognizes repair, reuse and repurposing as possible end-of-first-life pathways before recycling.

Step 1: Diagnose the Battery Before Deciding Its Fate

A battery no longer meeting an EV owner's range expectations is not automatically useless.

The first technical question is its state of health, or SOH.

State of health describes battery performance relative to its original condition, commonly including the remaining usable capacity of the battery.

Testing can also consider:

  • Remaining energy-storage capacity
  • Internal resistance
  • Cell or module imbalance
  • Voltage behavior
  • Charge and discharge history
  • Thermal history
  • Battery-management-system data
  • Evidence of physical damage, leakage or abnormal heating

There is no single universal capacity percentage that automatically makes every EV battery a second-life battery.

The acceptable condition depends on battery chemistry, pack design, safety, manufacturer requirements and the demands of the next application.

The U.S. Department of Energy's ReCell Center is developing diagnostics that assess batteries from the pack level down to individual cells specifically to support these decisions.

State of Charge and State of Health Are Not the Same Thing

The two terms are easily confused.

MeasurementWhat It Means
State of ChargeHow much energy is currently stored in the battery, similar to how full a fuel tank is.
State of HealthHow the battery's current performance compares with its condition when new.

A battery can have a low state of charge and still be in excellent health.

It can also be fully charged while having significantly degraded capacity.

Both measurements matter during end-of-life handling, but for different reasons.

State of charge has important safety implications because stored electrical energy remains in the pack. State of health helps determine whether continued use is technically and economically reasonable.

Route 1: Repair or Reuse the Battery

A battery can sometimes remain in its original type of application.

EPA notes that packs with failed modules may potentially be repaired by replacing defective components before the battery returns to an appropriate use.

Other batteries may be suitable for use in another vehicle with less demanding performance requirements.

This route preserves the highest-value function of the product: storing and delivering electricity as a battery.

But reuse only makes sense when the pack can perform safely and reliably.

A battery that is damaged, unstable or otherwise unsafe should not be pushed into a reuse market simply to postpone recycling.

Route 2: Give the Battery a Second Life

A pack that no longer delivers the power, range or performance expected in a vehicle may still be useful in a less demanding stationary-storage application.

Possible applications include:

  • Solar-energy storage
  • Commercial building storage
  • Backup power
  • Microgrids
  • Peak-demand management
  • Other stationary energy-storage systems

The concept is technically credible, but the commercial decision is more complicated.

Used batteries have to be removed, tested, transported and often reconfigured. Their history and remaining life may vary. New battery prices have also fallen substantially, which can narrow the economic advantage of second-life systems.

That creates competition between two possible values:

Energy value: Keep the battery intact and continue using its remaining storage capability.

Material value: Recycle the battery now and recover lithium, nickel, cobalt, copper and other materials for the supply chain.

The better choice can vary by battery chemistry, condition and market.

Route 3: Send the Battery to Recycling

Batteries that are damaged, unsafe, unsuitable for another application or simply more valuable as material can move into recycling.

This does not mean an intact EV pack is immediately thrown into a conventional shredder.

The battery first has to be received, identified and handled according to its condition.

Large packs may be partially dismantled into modules or cells before further processing.

Stored electrical energy also has to be managed safely.

Depending on the recycling system, batteries may be discharged before shredding or processed under conditions designed to control fire and thermal-runaway risks.

Why EV Battery Packs Are Difficult to Dismantle

Battery packs were historically designed first for vehicle performance, durability and crash protection — not necessarily for fast end-of-life disassembly.

Recyclers may encounter:

  • Bolted enclosures
  • Adhesives
  • Welded connections
  • Coolant systems
  • High-voltage cables
  • Electronic control units
  • Different module and cell formats
  • Manufacturer-specific designs

That lack of standardization can increase labor, equipment requirements and safety risk.

DOE research programs are therefore examining batteries that can be more easily diagnosed, repaired, disassembled and ultimately recycled.

What Comes Out of an EV Battery Before the Metals Are Refined?

Mechanical processing can produce several material streams.

OutputWhat It Contains
Black massFine cathode and anode material containing battery-active materials.
Copper foilConductive material associated with the battery anode.
Aluminum foilConductive material associated with the battery cathode.
Steel and aluminumPack, module and cell structural materials.
Plastics and separatorsInsulation, separator films and other polymer components.
Electrolyte and other residualsMaterials requiring appropriate process and environmental controls.

What Is Black Mass?

Black mass is one of the most important intermediate products in lithium-ion battery recycling.

EPA describes it as the granular material made from shredded battery cathodes and anodes.

Depending on the battery chemistry, it can contain valuable concentrations of:

  • Lithium
  • Nickel
  • Cobalt
  • Manganese
  • Graphite

But black mass is not a standardized commodity with one fixed composition.

Its chemistry depends on the batteries entering the process and the way they were shredded and separated.

A batch produced primarily from nickel-rich NMC batteries can have a very different commercial profile from one dominated by lithium iron phosphate batteries.

Important:

Producing black mass is not the same thing as producing battery-grade lithium, nickel or cobalt. The black mass still requires additional material recovery and refining before those materials can return to battery manufacturing.

Three Battery Recycling Routes

1. Hydrometallurgy

Hydrometallurgical recycling uses liquid-based chemical processes to dissolve and separate metals from battery material.

EPA notes that leaching systems can recover high amounts of cobalt, nickel, lithium and manganese.

The recovered materials then require further refining and preparation before they become new battery components.

2. Pyrometallurgy

Pyrometallurgy uses high-temperature smelting.

The process has historically been effective at recovering metals such as nickel and cobalt.

Other materials, including lithium, may require additional processing from residues to achieve recovery.

Some smelting systems can process batteries without a separate shredding stage.

3. Direct Recycling

Direct recycling attempts to preserve more of the value already engineered into the battery material.

Instead of breaking the cathode entirely down into basic metal compounds and rebuilding it, direct recycling aims to recover cathode material in a form that can be regenerated and returned more directly to battery production.

The U.S. Department of Energy's ReCell Center is developing this approach because preserving the cathode structure could reduce processing steps and retain more value.

Direct recycling remains an emerging route rather than the dominant commercial process.

Battery Chemistry Changes the Economics

An EV battery is not simply a box of lithium.

The cathode chemistry strongly affects the metals available for recovery.

Nickel-manganese-cobalt, or NMC, and related nickel-rich batteries contain nickel and cobalt that historically provided meaningful recycling value.

Lithium iron phosphate, or LFP, batteries do not contain nickel or cobalt in their cathodes.

That changes the economics.

In 2025, LFP accounted for more than half of global EV battery deployment.

The chemistry's lower material cost helps reduce new battery prices, but it can also leave recyclers with less high-value metal revenue per battery.

ChemistryKey Cathode MaterialsRecycling Implication
NMC / nickel-rich chemistriesLithium, nickel, manganese, cobaltNickel and cobalt can provide significant recoverable material value.
LFPLithium, iron, phosphateLower-value cathode metals can make logistics and processing economics more challenging.

This makes efficient collection and process design increasingly important.

A recycling business model built around high cobalt and nickel values may not perform the same way as the global battery fleet shifts toward lower-cost chemistries.

The Industry Has a Timing Problem: Recycling Plants Are Arriving Before the Batteries

Battery recycling is expanding rapidly, but the expected wave of retired EV batteries is still developing.

The International Energy Agency says most batteries installed during the rapid EV and storage expansion since 2020 remain in service.

For now, manufacturing scrap from battery-cell and component factories remains a major recycling feedstock.

The balance changes later.

The IEA expects end-of-life EV and energy-storage batteries to become the largest source of battery-recycling feedstock around the mid-2030s.

Its 2026 battery-circularity work estimates approximately:

2030: ~1.2 million EV batteries reaching end of life

2040: ~14 million EV batteries reaching end of life

That creates a difficult investment period.

Recyclers need capacity before the major battery wave arrives, but plants need enough material now to maintain utilization and economics.

RecyclingMonster recently reported that existing and planned North American capacity is projected to exceed available feedstock through 2030.

Feedstock Contracts May Matter More Than Nameplate Capacity

A recycling company's plant capacity only matters if it can obtain batteries or manufacturing scrap to process.

That makes supply relationships commercially important.

Near-term recyclers may compete for:

  • Battery manufacturing scrap
  • Warranty-return batteries
  • Damaged packs
  • Automotive dismantler material
  • Fleet batteries
  • Energy-storage batteries
  • Consumer and industrial lithium-ion feedstock

Recyclers connected directly to battery manufacturers or automakers may therefore have an important utilization advantage while end-of-life EV volumes remain limited.

U.S. Regulation: An EV Battery Is Not Household Waste

Under federal U.S. hazardous-waste rules, an EV battery removed at a dealership, auto repair shop, scrap yard or similar commercial facility is not household hazardous waste.

EPA says most discarded lithium-ion batteries are likely to exhibit hazardous-waste characteristics because of ignitability and reactivity.

Non-household generators are responsible for determining whether their discarded batteries are hazardous waste and managing them accordingly.

EPA recommends that businesses consider managing used lithium batteries under the federal universal waste regulations.

Universal-waste handlers can perform certain activities such as sorting batteries, discharging them and disassembling packs into batteries or modules, provided individual cell casings are not breached.

Shredding batteries into black mass is different.

EPA says universal-waste handlers cannot shred batteries to make black mass. That recycling step occurs at an appropriate destination facility.

Reuse Has a Different Regulatory Status

EPA also distinguishes legitimate reuse from waste management.

A lithium battery removed from one application and legitimately reused or repurposed into another useful application can fall under the federal use/reuse exclusion rather than being treated as discarded solid waste.

But the reuse must be legitimate.

The battery needs to provide a useful function, be managed as a valuable product and be suitable and safe for the new application.

A damaged battery should not be called “reusable” simply to avoid waste-management obligations.

Transportation Is Its Own Regulatory Step

A used EV battery does not stop being a high-energy device because it has been removed from the vehicle.

The U.S. Department of Transportation regulates lithium batteries as hazardous materials in commercial transportation.

Requirements can depend on:

  • Battery condition
  • Size
  • Configuration
  • Whether it is installed in a vehicle
  • Packaging
  • Transportation mode

Damaged, defective and recalled batteries require additional precautions because of their greater potential to short circuit, generate heat or catch fire.

This makes logistics one of the major cost and safety components of the battery-recycling chain.

For the broader handling requirements, see RecyclingMonster's Lithium-Ion Battery Disposal and Recycling Guide.

Europe Is Building a Much More Prescriptive Battery System

The European Union's Batteries Regulation covers the entire battery lifecycle, including EV batteries.

Its requirements go beyond safe waste handling.

By the end of 2025, recycling of lithium-based batteries must achieve at least 65% recycling efficiency by average weight.

That target rises to 70% by the end of 2030.

Material-recovery targets are more specific.

MaterialBy End of 2027By End of 2031
Cobalt90%95%
Copper90%95%
Lithium50%80%
Nickel90%95%

In September 2026, the European Commission reviewed these targets and concluded that they remain appropriate rather than recommending that they be weakened or increased.

The EU Battery Passport Arrives in February 2027

One of the most important changes for the battery value chain is now only months away.

Starting February 18, 2027, each EV battery placed on the EU market or put into service must have an electronic battery passport.

The passport will contain model-level and battery-specific information, with different data available to the public, regulators and parties with legitimate access rights.

The system is designed to make battery information more traceable across manufacturing, use, repair, repurposing and end of life.

That matters to recyclers because better information about a battery's chemistry, design and history can reduce uncertainty when the pack reaches the secondary market.

Why this matters beyond Europe

A global automaker is unlikely to treat battery traceability as an entirely isolated European issue. As battery-passport systems mature, standardized battery data could increasingly influence diagnostics, repair, reuse, trade and recycling practices across international supply chains.

Recycling Does Not Eliminate the Need for Mining

Battery recycling is often presented as though it can quickly replace primary mineral production.

The timing does not support that conclusion.

Most EV batteries needed for large-scale future recycling have not reached end of life yet.

Battery demand is also continuing to grow.

The IEA expects EV battery deployment to rise substantially through 2035, meaning recycled material will supplement rather than immediately replace primary mining.

Longer term, the contribution becomes much larger.

The IEA estimates that strong recycling systems could materially reduce the need for new lithium, nickel and cobalt production as end-of-life battery volumes expand.

Industry Edge: The Most Valuable Recycler May Be the One That Knows When Not to Recycle Yet

The EV battery circular economy is increasingly a sorting problem before it becomes a metallurgical problem. Diagnostics determine whether a battery should remain a battery or become feedstock. That makes state-of-health data, pack traceability, safe dismantling and access to battery-management-system information potentially as important as shredding capacity. At the same time, recyclers still need dependable feedstock contracts as manufacturing scrap dominates the near-term market and end-of-life EV batteries arrive in larger volumes only later.

The EV Battery Circularity Chain

StageKey Decision
Vehicle retirement / battery removalIs the pack intact and safe to evaluate?
DiagnosticsWhat is the battery's state of health and remaining useful life?
Repair / reuseCan defective components be repaired or replaced safely?
Second lifeIs remaining performance suitable for a less demanding application?
Recycling preparationHow should the pack be discharged, dismantled, stored and transported?
Mechanical processingHow are black mass, copper, aluminum, steel and plastics separated?
Material recoveryWhich hydrometallurgical, pyrometallurgical or direct-recycling process fits the chemistry?
RefiningCan recovered material reach battery-grade specifications?
New manufacturingCan the recovered material return to cathodes, anodes or new battery cells?

The Bottom Line

EV battery recycling is not one industrial process.

It is a sequence of decisions.

First, determine whether the battery can continue delivering value as a battery.

Then determine whether repair, reuse or repurposing makes technical and economic sense.

Only after that decision does material recovery begin.

For batteries entering recycling, dismantling and mechanical processing create streams including copper, aluminum, structural metals and black mass. Hydrometallurgy and pyrometallurgy recover critical materials from that feedstock, while direct recycling aims to preserve more of the engineered cathode value.

The industry now faces two simultaneous challenges.

It has to build enough capacity for the millions of EV batteries that will eventually retire, while operating economically during a period when those batteries are not yet arriving at full scale.

And it has to adapt as battery chemistry changes the value of what recyclers recover.

The future of EV battery recycling will depend not only on how efficiently companies recover metals, but on how intelligently the industry decides when a battery should remain a battery and when it should become raw material again.

Frequently Asked Questions About EV Battery Recycling

What happens to an EV battery when the car reaches end of life?

The battery can be removed and assessed for repair, reuse, repurposing or recycling. Batteries selected for recycling can be dismantled and mechanically processed before their metals and active materials undergo further recovery.

What is black mass in battery recycling?

Black mass is the concentrated material produced from shredded battery cathodes and anodes. Depending on battery chemistry, it can contain lithium, nickel, cobalt, manganese and graphite that require further processing and refining.

Can an old EV battery be used for energy storage?

Potentially. Batteries with adequate remaining performance and acceptable safety characteristics may be evaluated for second-life stationary storage. The economic case depends on testing, reconfiguration, transportation, new battery prices and the intended application.

What is the difference between hydrometallurgy and direct battery recycling?

Hydrometallurgy uses liquid chemical processes to recover metals from battery material. Direct recycling aims to preserve and regenerate higher-value cathode material without completely breaking it back down into basic metal compounds.

Are EV batteries regulated as hazardous waste in the United States?

EPA says most discarded lithium-ion batteries are likely to exhibit hazardous-waste characteristics for ignitability and reactivity. EV batteries removed at dealerships, repair shops, scrap yards or similar businesses are not household hazardous waste, and the generator must determine and follow the applicable federal and state requirements.

Primary Sources and Verification

  • U.S. Environmental Protection Agency — Lithium-Ion Battery Recycling
  • U.S. Environmental Protection Agency — Lithium-Ion Battery Recycling Frequently Asked Questions
  • U.S. Department of Transportation / PHMSA — Transporting Lithium Batteries
  • U.S. Department of Energy ReCell Center — Design for Recycling and Direct Recycling Research
  • International Energy Agency — Global EV Outlook 2026
  • International Energy Agency / European Patent Office — Battery Circularity, 2026
  • European Commission — Regulation (EU) 2023/1542 and 2026 Battery Recycling Target Review
  • European Commission — Digital Battery Passport Implementation Guidance

Last verified: November 16, 2026.

How to Conduct a Commercial Waste Audit: Checklist, Sampling and Action Plan
How to Conduct a Commercial Waste Audit: Checklist, Sampling and Action Plan
A commercial waste audit shows what a business is actually throwing away, what is contaminating its recycling and where disposal costs may be reduced. This guide explains how to set the audit scope, choose a…
HDPE #2 Plastic Recycling: Bottles, Jugs, Color Sorts and Recycled Uses
HDPE #2 Plastic Recycling: Bottles, Jugs, Color Sorts and Recycled Uses
HDPE #2 is one of the most established plastics in North American recycling, but milk jugs, detergent bottles, tubs and bulky rigid items do not all follow the same route. Learn how natural and colored…
PET #1 Plastic Recycling: What It Is, What’s Accepted and How It’s Reprocessed
PET #1 Plastic Recycling: What It Is, What’s Accepted and How It’s Reprocessed
PET #1 is one of North America’s most established recycled plastics, but the number alone does not guarantee local acceptance. Learn which PET bottles and thermoforms are commonly accepted, what happens at a MRF and…